This guide describes how to use Calico to secure the network interfaces of the host itself (as opposed to those of any container/VM workloads that are present on the host). We call such interfaces “host endpoints”, to distinguish them from “workload endpoints” (such as containers or VMs).
Calico supports the same rich security policy model for host endpoints (host endpoint policy) that it supports for workload endpoints. Host endpoints can have labels, and their labels are in the same “namespace” as those of workload endpoints. This allows security rules for either type of endpoint to refer to the other type (or a mix of the two) using labels and selectors.
Calico does not support setting IPs or policing MAC addresses for host interfaces, it assumes that the interfaces are configured by the underlying network fabric.
Calico distinguishes workload endpoints from host endpoints by a configurable
prefix. Unless you happen to have host interfaces whose name matches the
default for that prefix (
cali), you won’t need to change it. In case you do,
InterfacePrefix configuration value at Configuring
Interfaces that start with a value listed in
InterfacePrefix are assumed to
be workload interfaces. Others are treated as host interfaces.
Calico blocks all traffic to/from workload interfaces by default; allowing traffic only if the interface is known and policy is in place. However, for host endpoints, Calico is more lenient; it only polices traffic to/from interfaces that it’s been explicitly told about. Traffic to/from other interfaces is left alone.
You can use host endpoint policy to secure a NAT gateway or router. Calico supports selector-based policy when running on a gateway or router, allowing for rich, dynamic security policy based on the labels attached to your host endpoints.
You can apply host endpoint policies to three types of traffic:
- Traffic that is terminated locally.
- Traffic that is forwarded between host endpoints.
- Traffic that is forwarded between a host endpoint and a workload endpoint on the same host.
applyOnForward flag to
true to apply a policy to forwarded traffic.
See GlobalNetworkPolicy spec.
Note: Both traffic forwarded between host endpoints and traffic forwarded between a host endpoint and a workload endpoint on the same host is regarded as