How Calico Interprets Neutron API Calls
When running in an OpenStack deployment, Calico receives and interprets certain Neutron API actions, in order to program those actions down into the network. However, because Calico is substantially simpler than much of what Neutron generally allows (see External Connectivity) and because it’s a purely layer 3 model (see The Calico Datapath, not all Neutron API calls will have the same effect as they would with other backends.
This document will go into detail on the full range of Neutron API calls, and will discuss the effect they have on the network. It uses the Networking API v2.0 document from OpenStack as a basis for listing the various objects that the Neutron API uses: see that document for more information about what Neutron expects more generally.
Additionally, there is a section of this document that briefly covers Horizon actions.
Networks are the basic networking concept in Neutron. A Neutron network is considered to be roughly equivalent to a physical network in terms of function: it defines a single layer 2 connectivity graph.
In vanilla Neutron, these can map to the underlay network in various ways, either by being encapsulated over it or by being directly mapped to it.
Generally speaking, Neutron networks can be created by all tenants. The administrator tenant will generally create some public Neutron networks that map to the underlay physical network directly for providing floating IPs: other tenants will create their own private Neutron networks as necessary.
In Calico, because all traffic is L3 and routed, the role of Neutron network as L2 connectivity domain is not helpful. Therefore, in Calico, Neutron networks are simply containers for subnets. Best practices for operators configuring Neutron networks in Calico deployments can be found in this document.
It is not useful for non-administrator tenants to create their own Neutron networks. Although Calico will allow non-administrator tenants to create Neutron networks, generally speaking administrators should use Neutron quotas to prevent non-administrator tenants from doing this.
Network creation events on the API are no-op events in Calico: a positive (2XX) response will be sent but no programming will actually occur.
Extended Attributes: Provider Networks
Neutron Provider networks are not used in Calico deployments. Setting provider network extended attributes will have no effect. See this document to understand why Neutron provider networks are not needed.
Neutron subnets are child objects of Neutron networks. In vanilla Neutron, a subnet is a collection of IP addresses and other network configuration (e.g. DNS servers) that is associated with a single Neutron network. A single Neutron network may have multiple Neutron subnets associated with it. Each Neutron subnet represents either an IPv4 or IPv6 block of addresses.
Best practices for configuring Neutron subnets in Calico deployments can be found here.
In Calico, these roles for the Neutron subnet are preserved in their entirety. All properties associated with these Neutron subnets are preserved and remain meaningful except for:
These have no effect, as the compute nodes will route traffic immediately after it egresses the VM.
In vanilla Neutron, a port represents a connection from a VM to a single layer 2 Neutron network. Obviously, the meaning of this object changes in a Calico deployment: instead, a port is a connection from a VM to the shared layer 3 network that Calico builds in Neutron.
All properties on a port work as normal, except for the following:
The network ID still controls which Neutron network the port is attached to, and therefore still controls which Neutron subnets it will be placed in. However, as per the note above, the Neutron network that a port is placed in does not affect which machines in the deployment it can contact.
Extended Attributes: Port Binding Attributes
binding:host-id attribute works as normal. The following notes
apply to the other attributes:
This is unused in Calico.
This field, if used, must be set to
normal. If set to any other value, Calico will not correctly function!
Neutron quotas function unchanged.
In most deployments we recommend setting non-administrator tenant quotas for almost all Neutron objects to zero. For more information, see here.
Security groups in vanilla OpenStack provide packet filtering processing to individual ports. They can be used to limit the traffic a port may issue.
In Calico, security groups have all the same function. Additionally, they serve to provide the connectivity-limiting function that in vanilla OpenStack is provided by Neutron networks.
All the attributes of security groups remain unchanged in Calico.
Layer 3 Routing: Routers and Floating IPs
Layer 3 routing objects are divided into two categories: routers and floating IPs. Neither of these objects are supported by Calico: they simply aren’t required. For more information, see this document.
Any attempt to create these objects will fail, as Calico does not set up any Neutron L3 Agents.
LBaaS (Load Balancer as a Service)
Load Balancer as a Service does not function in a Calico network. Any attempt to create one will fail.
It is possible that in a future version of Calico LBaaS may be
- functional. Watch this space.
Horizon makes many provisioning actions available that mirror options on the Neutron API. This section lists them, and indicates whether they can be used or not, and any subtleties that might be present in them.
Much of the detail has been left out of this section, and is instead present in the relevant Neutron API sections above: please consult them for more.
Tab: Compute -> Instances
When launching instances, remember that security groups are used to determine reachability, not networks. Choose networks based on whether you need an external or an internal IP address, and choose security groups based on the machines you’d like to talk to in the cloud. See here for more.
Tab: Compute -> Access & Security
As noted above, tenants should ensure they configure their security groups to set up their connectivity appropriately.
Tab: Network -> Network Topology
Tab: Network -> Networks
Tab: Network -> Routers
Tenants should be prevented from creating routers, as they serve no purpose in a Calico network. See Layer 3 Routing for more.
Tab: System Panel -> Networks
In the course of general operation administrators are not expected to make changes to their networking configuration. However, for initial network setup, this panel may be used to make changes. See this document for details on how to achieve this setup.
Tab: System Panel -> Routers
Administrators should not create routers, as they serve no purpose in a Calico network. See Layer 3 Routing for more.