Felix Configuration Resource (FelixConfiguration)

A Felix configuration resource (FelixConfiguration) represents Felix configuration options for the cluster.

For calicoctl commands that specify a resource type on the CLI, the following aliases are supported (all case insensitive): felixconfiguration, felixconfig, felixconfigurations, felixconfigs.

See Configuring Felix for more details.

Sample YAML

apiVersion: projectcalico.org/v3
kind: FelixConfiguration
metadata:
  name: default
spec:
  ipv6Support: false
  ipipMTU: 1400
  chainInsertMode: Append

Felix Configuration Definition

Metadata

Field Description Accepted Values Schema
name Unique name to describe this resource instance. Required. Alphanumeric string with optional ., _, or -. string
  • Calico automatically creates a resource named default containing the global default configuration settings for Felix. You can use calicoctl to view and edit these settings
  • The resources with the name node.<nodename> contain the node-specific overrides, and will be applied to the node <nodename>. When deleting a node the FelixConfiguration resource associated with the node will also be deleted.

Spec

Field Description Accepted Values Schema Default
chainInsertMode Controls whether Felix hooks the kernel’s top-level iptables chains by inserting a rule at the top of the chain or by appending a rule at the bottom. Insert is the safe default since it prevents Calico’s rules from being bypassed. If you switch to Append mode, be sure that the other rules in the chains signal acceptance by falling through to the Calico rules, otherwise the Calico policy will be bypassed. Insert, Append string Insert
defaultEndpointToHostAction This parameter controls what happens to traffic that goes from a workload endpoint to the host itself (after the traffic hits the endpoint egress policy). By default Calico blocks traffic from workload endpoints to the host itself with an iptables “DROP” action. If you want to allow some or all traffic from endpoint to host, set this parameter to Return or Accept. Use Return if you have your own rules in the iptables “INPUT” chain; Calico will insert its rules at the top of that chain, then Return packets to the “INPUT” chain once it has completed processing workload endpoint egress policy. Use Accept to unconditionally accept packets from workloads after processing workload endpoint egress policy. Drop, Return, Accept string Drop
failsafeInboundHostPorts UDP/TCP protocol/port pairs that Felix will allow incoming traffic to host endpoints on irrespective of the security policy. This is useful to avoid accidentally cutting off a host with incorrect configuration. The default value allows SSH access, etcd, BGP and DHCP.   List of ProtoPort

- protocol: tcp
  port: 22
- protocol: udp
  port: 68
- protocol: tcp
  port: 179
- protocol: tcp
  port: 2379
- protocol: tcp
  port: 2380
- protocol: tcp
  port: 6666
- protocol: tcp
  port: 6667

failsafeOutboundHostPorts UDP/TCP protocol/port pairs that Felix will allow outgoing traffic from host endpoints to irrespective of the security policy. This is useful to avoid accidentally cutting off a host with incorrect configuration. The default value opens etcd’s standard ports to ensure that Felix does not get cut off from etcd as well as allowing DHCP and DNS.   List of ProtoPort

- protocol: udp
  port: 53
- protocol: udp
  port: 67
- protocol: tcp
  port: 179
- protocol: tcp
  port: 2379
- protocol: tcp
  port: 2380
- protocol: tcp
  port: 6666
- protocol: tcp
  port: 6667

ignoreLooseRPF Set to true to allow Felix to run on systems with loose reverse path forwarding (RPF). Warning: Calico relies on “strict” RPF checking being enabled to prevent workloads, such as VMs and privileged containers, from spoofing their IP addresses and impersonating other workloads (or hosts). Only enable this flag if you need to run with “loose” RPF and you either trust your workloads or have another mechanism in place to prevent spoofing. boolean boolean false
interfaceExclude A comma-separated list of interface names that should be excluded when Felix is resolving host endpoints. The default value ensures that Felix ignores Kubernetes’ internal kube-ipvs0 device. string string kube-ipvs0
interfacePrefix The interface name prefix that identifies workload endpoints and so distinguishes them from host endpoint interfaces. Note: in environments other than bare metal, the orchestrators configure this appropriately. For example our Kubernetes and Docker integrations set the ‘cali’ value, and our OpenStack integration sets the ‘tap’ value. string string cali
ipipEnabled Whether Felix should configure an IPinIP interface on the host. Set automatically to true by calico/node or calicoctl when you create an IPIP-enabled pool. boolean false  
ipipMTU The MTU to set on the tunnel device. See Configuring MTU int int 1440
ipsetsRefreshInterval Period, in seconds, at which Felix re-checks the IP sets in the dataplane to ensure that no other process has accidentally broken Calico’s rules. Set to 0 to disable IP sets refresh. Note: the default for this value is lower than the other refresh intervals as a workaround for a Linux kernel bug that was fixed in kernel version 4.11. If you are using v4.11 or greater you may want to set this to a higher value to reduce Felix CPU usage. int int 10
iptablesFilterAllowAction This parameter controls what happens to traffic that is accepted by a Felix policy chain in the iptables filter table (i.e. a normal policy chain). The default will immediately Accept the traffic. Use Return to send the traffic back up to the system chains for further processing. Accept, Return string Accept
iptablesLockFilePath Location of the iptables lock file. You may need to change this if the lock file is not in its standard location (for example if you have mapped it into Felix’s container at a different path). string string /run/xtables.lock
iptablesLockProbeIntervalMillis Time, in milliseconds, that Felix will wait between attempts to acquire the iptables lock if it is not available. Lower values make Felix more responsive when the lock is contended, but use more CPU. int int 50
iptablesLockTimeoutSecs Time, in seconds, that Felix will wait for the iptables lock, or 0, to disable. To use this feature, Felix must share the iptables lock file with all other processes that also take the lock. When running Felix inside a container, this requires the /run directory of the host to be mounted into the calico/node or calico/felix container. int int 0 (Disabled)
iptablesMangleAllowAction This parameter controls what happens to traffic that is accepted by a Felix policy chain in the iptables mangle table (i.e. a pre-DNAT policy chain). The default will immediately Accept the traffic. Use Return to send the traffic back up to the system chains for further processing. Accept, Return string Accept
iptablesMarkMask Mask that Felix selects its IPTables Mark bits from. Should be a 32 bit hexadecimal number with at least 8 bits set, none of which clash with any other mark bits in use on the system. netmask netmask 0xff000000
iptablesPostWriteCheckIntervalSecs Period, in seconds, after Felix has done a write to the dataplane that it schedules an extra read back in order to check the write was not clobbered by another process. This should only occur if another application on the system doesn’t respect the iptables lock. int int 1
iptablesRefreshIntervalSecs Period, in seconds, at which Felix re-checks all iptables state to ensure that no other process has accidentally broken Calico’s rules. Set to 0 to disable iptables refresh. int int 90
ipv6Support IPv6 support for Felix true, false boolean true
logFilePath The full path to the Felix log. Set to "" to disable file logging. string string /var/log/calico/felix.log
logPrefix The log prefix that Felix uses when rendering LOG rules. string string calico-packet
logSeverityFile The log severity above which logs are sent to the log file. Same as logSeveritySys string Info
logSeverityScreen The log severity above which logs are sent to the stdout. Same as LogSeveritySys string Info
logSeveritySys The log severity above which logs are sent to the syslog. Set to "" for no logging to syslog. Debug, Info, Warning, Error, Fatal string Info
maxIpsetSize Maximum size for the ipsets used by Felix to implement tags. Should be set to a number that is greater than the maximum number of IP addresses that are ever expected in a tag. int int 1048576
metadataAddr The IP address or domain name of the server that can answer VM queries for cloud-init metadata. In OpenStack, this corresponds to the machine running nova-api (or in Ubuntu, nova-api-metadata). A value of none (case insensitive) means that Felix should not set up any NAT rule for the metadata path. IPv4, hostname, none string 127.0.0.1
metadataPort The port of the metadata server. This, combined with global.MetadataAddr (if not ‘None’), is used to set up a NAT rule, from 169.254.169.254:80 to MetadataAddr:MetadataPort. In most cases this should not need to be changed. int int 8775
prometheusGoMetricsEnabled Set to false to disable Go runtime metrics collection, which the Prometheus client does by default. This reduces the number of metrics reported, reducing Prometheus load. boolean boolean true
prometheusMetricsEnabled Set to true to enable the experimental Prometheus metrics server in Felix. boolean boolean false
prometheusMetricsPort Experimental: TCP port that the Prometheus metrics server should bind to. int int 9091
prometheusProcessMetricsEnabled Set to false to disable process metrics collection, which the Prometheus client does by default. This reduces the number of metrics reported, reducing Prometheus load. boolean boolean true
reportingIntervalSecs Interval at which Felix reports its status into the datastore or 0 to disable. Must be non-zero in OpenStack deployments. int int 30
reportingTTLSecs Time-to-live setting for process-wide status reports. int int 90
routeRefreshIntervalSecs Period, in seconds, at which Felix re-checks the routes in the dataplane to ensure that no other process has accidentally broken Calico’s rules. Set to 0 to disable route refresh. int int 90
usageReportingEnabled Reports anonymous Calico version number and cluster size to projectcalico.org. Logs warnings returned by the usage server. For example, if a significant security vulnerability has been discovered in the version of Calico being used. boolean boolean true
usageReportingInitialDelaySecs Minimum initial delay before first usage report, in seconds. int int 300
usageReportingIntervalSecs The interval at which Felix does usage reports, in seconds. The default is 1 day. int int 86400

ProtoPort

Field Description Accepted Values Schema
port The exact port match 0-65535 int
protocol The protocol match tcp, udp string

Supported operations

Datastore type Create Delete Delete (Global default) Update Get/List Notes
etcdv3 Yes Yes No Yes Yes  
Kubernetes API server Yes Yes No Yes Yes