Imagine that the administrator of a Kubernetes cluster wants to secure it as much as possible against incoming traffic from outside the cluster. But suppose that the cluster provides various useful services that are exposed as Kubernetes NodePorts, i.e., as well-known TCP port numbers that appear to be available on any node in the cluster. The administrator does want to expose some of those NodePorts to traffic from outside.
In this example we will use pre-DNAT policy applied to the external interfaces of each cluster node:
to disallow incoming traffic from outside, in general
but then to allow incoming traffic to particular NodePorts.
We use pre-DNAT policy for these purposes, instead of normal host endpoint policy, because:
We want the protection against general external traffic to apply regardless of where that traffic is destined for - for example, to a locally hosted pod, or to a pod on another node, or to a local server process running on the host itself. Pre-DNAT policy is enforced in all of those cases - as we want - whereas normal host endpoint policy is not enforced for traffic going to a local pod.
We want to write this policy in terms of the advertised NodePorts, not in terms of whatever internal port numbers those may be transformed to. kube-proxy on the ingress node will use a DNAT to change a NodePort number and IP address to those of one of the pods that backs the relevant Service. Our policy therefore needs to take effect before that DNAT - and that means that it must be a pre-DNAT policy.
Here is the pre-DNAT policy that we need to disallow incoming external traffic in general:
calicoctl apply -f - <<EOF - apiVersion: projectcalico.org/v3 kind: GlobalNetworkPolicy metadata: name: allow-cluster-internal-ingress spec: order: 10 preDNAT: true applyOnForward: true ingress: - action: Allow source: nets: [10.240.0.0/16, 192.168.0.0/16] selector: has(host-endpoint) - apiVersion: projectcalico.org/v3 kind: GlobalNetworkPolicy metadata: name: drop-other-ingress spec: order: 20 preDNAT: true applyOnForward: true ingress: - action: Deny selector: has(host-endpoint) EOF
Specifically, this policy allows traffic coming from IP addresses that are known to be cluster-internal, and denies traffic from any other sources. For the cluster-internal IP addresses in this example, we assume 10.240.0.0/16 for the nodes’ own IP addresses, and 192.168.0.0/16 for IP addresses that Kubernetes will assign to pods; obviously you should adjust for the CIDRs that are in use in your own cluster.
drop-other-ingresspolicy has a higher
allow-cluster-internal-ingress, so that it applies after
drop-other-ingresspolicy is needed because there is no automatic default-drop semantic for pre-DNAT policy. There is a default-drop semantic for normal host endpoint policy but—as noted above—normal host endpoint policy is not always enforced.
We also need policy to allow egress traffic through each node’s external interface. Otherwise, when we define host endpoints for those interfaces, no egress traffic will be allowed from local processes (except for traffic that is allowed by the failsafe rules). Because there is no default-deny rule for forwarded traffic, forwarded traffic will be allowed for host endpoints.
calicoctl apply -f - <<EOF - apiVersion: projectcalico.org/v3 kind: GlobalNetworkPolicy metadata: name: allow-outbound-external spec: order: 10 egress: - action: Allow selector: has(host-endpoint) EOF
Note: These egress rules are defined as normal host endpoint policies, not pre-DNAT, because pre-DNAT policy does not support egress rules. (Which is because pre-DNAT policies are enforced at a point in the Linux networking stack where it is not yet determined what a packet’s outgoing interface will be.)
Because these are normal host endpoint policies which do not apply to forwarded traffic (
false), they are not enforced for traffic that is sent from a local pod.
The policy above allows applications or server processes running on the nodes themselves (as opposed to in pods) to connect outbound to any destination. In case you have a use case for restricting to particular IP addresses, you can achieve that by adding a corresponding
Now we can define a host endpoint for the outwards-facing interface of each
node. The policies above all have a selector that makes them applicable to any
endpoint with a
host-endpoint label, so we should include that label in our
definitions. For example, for
calicoctl apply -f - <<EOF - apiVersion: projectcalico.org/v3 kind: HostEndpoint metadata: name: node1-eth0 labels: host-endpoint: ingress spec: interfaceName: eth0 node: node1 EOF
After defining host endpoints for each node, you should find that internal
cluster communications are all still working as normal—for example, that you
can successfully execute commands like
calicoctl get hep and
pol—but that it is impossible to connect into the cluster from outside
(except for any failsafe ports). For example, if the
cluster includes a Kubernetes Service that is exposed as NodePort 31852, you
should find, at this point, that that NodePort works from within the cluster,
but not from outside.
To open a pinhole for that NodePort, for external access, you can configure a pre-DNAT policy like this:
calicoctl apply -f - <<EOF - apiVersion: projectcalico.org/v3 kind: GlobalNetworkPolicy metadata: name: allow-nodeport spec: preDNAT: true applyOnForward: true order: 10 ingress: - action: Allow protocol: TCP destination: ports:  selector: has(host-endpoint) EOF
If you wanted to make that NodePort accessible only through particular nodes, you could achieve that by giving those nodes a particular
and then using
host-endpoint=='<special-value>' as the selector of the
allow-nodeport policy, instead of